Komilfo Gel Jelly Clear, 30 g

Komilfo Gel Jelly
Volume: 30 g
Color: Clear

The advantage of choosing Komilfo products:

• Komilfo Gel Jelly – a gel with a unique consistency of jelly that does not flow, while easily aligned with a brush and creates a perfect nail architecture with minimal dusting.
• Viscous.
• Created for a three-phase system.
• Easily presses and holds the arch.
• Suitable for strengthening, building, modeling complex shapes and correction.

The gel is polymerized in LED and UV lamps!

Technology of using gel jelly:

• Make a standard preparation of the nail plate for extension. It is desirable to exclude maceration with water before building.
  Degrease the nail plate with Nail Prep and let it dry.
• Apply acid primer, avoiding contact with the cuticle and lateral rollers. Let it dry for 30 seconds.
  Prime the nail with a gel base. Dry in a lamp: 30 s in LED and hybrid, in UV – 2 minutes. Trim and place the shape under the nail.
• Spread the gel jelly on the form in several layers (recommended 2). Each layer is polymerized in a lamp: 60 s in LED and hybrid, in UV – 4 minutes. After the first drying, press the arch and dry for another 30 seconds. After the second layer, press the arch and allow the material to harden in this state (3-4 minutes).

* For a gel-jelly coat: put the form, with the help of a thin brush of the liner Komilfo lay out the desired “smile” with camouflage gel and dry. Apply the second layer of the nail body with an oval brush and dry. Delete the form. Use a cleaner to remove the sticky layer from the gel. Adjust the “smile” with a file and put the same shape again, put white gel jelly on it in 2 layers. Press the arch. Dry together with a clamp or let the form fix itself for 2-4 minutes.

• Wipe the finished nail with Nail Prep on the outside and inside and dust the desired nail architecture.
• Use Nail Prep to remove dust from the nail plate. You can apply a thin layer of top for gel system Komilfo and dry for 60-90 s in an LED lamp (in a UV lamp – 4 minutes) or apply a colored gel varnish in 2 layers, drying each layer, and fix the top for gel polishes.

Composition of Komilfo Gel Jelly:

Urethane Methacrylate, Glyceryl PropoxylateTriacrylate, Glycol Dimethacrylate, Hydroxypropyl Methacrylate, 2-Hydroxyethyl Methacrylate, PPG-5 Methacrylate, Silica, Trimethylbenzoyl Diphenylphosphine Oxide, Methyl Benzoylformate, Benzene Acetic Acid Alpha-oxo-,Oxydi-2,1-ethanediyl Ester, May Contain: Ci 19140, Ci 15850, Ci 60725, Ci77891.