LUNAmoon Carbide cutter "Herringbone" blue

LUNAmoon "Herringbone" carbide cutters have a conical shape and a cross-shaped notch that removes material evenly and smoothly, with little vibration. The nail plate does not heat up during use. Made of tungsten carbide for wear resistance and durability. Each cutter is tested for collet centering. Choose the size in the variant selector.

Variants:

• 061 – Herringbone blue 4.2mm (deeper notch for more efficient material removal): head length 15.2 mm; leg length 28.4 mm; working nozzle diameter 1.8 mm; working part diameter (middle) 4.2 mm.
• 062 – Herringbone blue 4.1mm: head length 15.3 mm; leg length 34.8 mm; working nozzle diameter 2.3 mm; working part diameter (middle) 4.1 mm.

Common features:

• Shape: cone;
• Purpose: removing artificial coatings, nail correction, arch trimming;
• Suitable for soft, hard and hybrid coatings;
• Notch: blue, cross-shaped, medium abrasiveness;
• Recommended RPM: 25,000–35,000, direction: forward.

Carbide cutter care:

• Mechanical cleaning after each use using a special brush.
• Soaking in a special solution for cleaning burs and cutters or cleaning in an ultrasonic cleaner.
• Compliance with the concentration of the disinfectant solution according to the instructions (exceeding the concentration destroys the material).
• Dry heat sterilization is possible only when the cutter is completely dry and at a temperature not exceeding 180°C.

The shelf life is unlimited.