LUNAmoon Carbide cutters for sawing and cutting, cross-notch

LUNAmoon carbide cutters for sawing and cutting with a uniform cross-shaped notch across the entire surface, including the tip. They work neatly and gently, without overheating or vibration. Ideal for nail correction, arch shaping and removing burrs, even in hard-to-reach areas. Made of high-quality tungsten carbide for wear resistance and durability. Choose the shape in the variant selector.

Variants:

• 058 – Mini, rounded cylinder 1.3 mm: soft abrasiveness; nail correction, arch trimming, trimming of ingrown toenails; head length 7.5 mm; leg length 35.6 mm; working part diameter (middle) 1.3 mm.
• 059 – Tapered cone 2.0 mm: medium-hard abrasiveness; nail correction, arch shaping, removing burrs; head length 14.2 mm; leg length 23.9 mm; working tip diameter 1.3 mm; working part diameter (middle) 2.0 mm.
• 060 – Mini "Cone" blue 1.3 mm: medium abrasiveness, blue notch; nail correction, arch trimming, trimming of ingrown toenails; head length 8.0 mm; leg length 36 mm; working tip diameter 1.0 mm; working part diameter (middle) 1.3 mm.

Common features:

• Notch: cross-shaped, uniform across the entire surface including the tip;
• Recommended RPM: 15,000–25,000, direction: forward.

Advantages:

1. compact and convenient for small corrections;
2. delicate on the nail plate;
3. does not overheat and does not create vibrations;
4. suitable for detailed work in hard-to-reach areas.

Carbide cutter care:

• Mechanical cleaning after each use using a special brush.
• Soaking in a special solution for cleaning burs and cutters or cleaning in an ultrasonic cleaner.
• Compliance with the concentration of the disinfectant solution according to the instructions (exceeding the concentration destroys the material).
• Dry heat sterilization is possible only when the cutter is completely dry and at a temperature not exceeding 180°C.

The shelf life is unlimited.